+8615053126111
HTM750 Crawler Remote Control Lawn Mower

HTM750 Crawler Remote Control Lawn Mower

1 pkg. (Min.Order)

The intelligent lawn mower can complete the work of mowing the lawn independently, without direct human control and operation, and has low power, low noise, exquisite and beautiful appearance, and gre
Send Inquiry
Add To Cart
Download

Products Description

Introduction of HTM750 Crawler Remote Control  Lawn Mower

The intelligent lawn mower can complete the lawn mowing work independently without manual control and operation. It has the characteristics of low power, low noise, beautiful appearance, and greatly reduces the manual operation.

Preparing to Start the Remote Control Mower

(1) Be sure to confirm the tightness of the screws in each part before starting the machine.

(2) Turn on the power key switch of the machine, pull the right lever back and hold it down, then press the switch key of the remote control to turn on the remote control.

(3) "DiDi" will appear when the remote control is turned on, indicating that the machine matches the remote control normally.

(4) Engine start;

a> Release the brake on the right side of the engine (disconnect the ignition switch at the same time);

b> Turn the left throttle to the end counterclockwise (to open the engine throttle at the same time);

c> Pull the pull rope of the handle plate firmly to start the engine;

d> After starting the engine, adjust the throttle to the appropriate speed in time;

HTM750 Crawler Remote Control  Lawn Mower parameters


MODEL: HTM-750

Cutting width

550mm

Start mode

Hand pull/Button start

Height adjustment method

Remote control operation

Charging mode

Engine self charging system

Stubble height

20-150mm

Operation mode

Remote control operation

Walking speed

0-4km/h

Remote control distance

0-300m

Working slope

0-45°

Mowing efficiency

0-2200㎡/h

Product size

915mm*935mm*560mm

Net weight

175kg

Packaging size

970mm*990mm*610mm

Packaging weight

195kg

Engine

LONCIN224CC Engine/KOHLER200 Engine




HTM750 Crawler Remote Control  Lawn Mower Details

 


Q: What problems can remote - controlled lawn mowers solve and in which places are they used?

A: **Remote-controlled robotic lawn mowers** address labor-intensive lawn maintenance by automating precise, efficient grass cutting. They eliminate manual effort, reduce time consumption, and ensure consistent results across uneven terrain or complex layouts. Ideal for **residential gardens, commercial landscapes, public parks, and sports fields**, they excel in areas with slopes, tight spaces, or obstacle-rich environments. Their eco-friendly operation (low noise/emissions) and adaptability make them a sustainable choice for modern landscaping needs.

Q: How to use a remote - controlled lawn mower correctly?

A: To operate a remote-controlled robotic lawn mower effectively:
1. Pre-operation inspection: Ensure the area is clear of debris, pets, or obstacles. Map boundaries via GPS or physical markers.
2. Terrain assessment: Adjust cutting height and speed settings based on grass density and slope gradients.
3. Safety protocols: Maintain a safe operator distance, use real-time monitoring tools, and adhere to battery-life limits.
4. Post-use maintenance: Clean blades, recharge batteries, and update software for optimal performance.
Designed for precision, prioritize consistent patterns and obstacle-avoidance algorithms to maximize efficiency and longevity.

Q: What are the reasons for the instability of operation and equipment when using a remote - controlled lawn mower?

A: Common causes of instability in remote-controlled robotic lawn mowers include:
  • - Signal interference (e.g., Wi-Fi/Bluetooth disruptions) or weak GPS connectivity, impacting navigation accuracy.
  • - Uneven terrain or steep slopes exceeding the mower’s tilt tolerance, triggering safety shutdowns.
  • - Low battery voltage or power fluctuations, leading to erratic motor performance.
  • - Obstacle detection failures due to sensor misalignment, dirty lenses, or algorithmic inefficiencies.
  • - Blade imbalance or worn components (e.g., wheels, bearings) causing vibration or directional drift.
  • Regular calibration, firmware updates, and adherence to manufacturer guidelines mitigate these risks.

Why choose us?

  • We pride ourselves on our attention to detail and commitment to quality, ensuring that every Driving Chains product we deliver meets the highest standards.
  • Our Driving Chains products are designed with functionality and practicality in mind, ensuring they deliver maximum value to our customers.
  • Our Driving Chains products are easily installed and maintained, providing our customers with a hassle-free experience.
  • We are committed to providing our customers with accurate and transparent pricing on all of our Driving Chains products and services.
  • We have a proven track record of delivering high-quality Driving Chains products and services to customers around the world.
  • Our Driving Chains products are built to deliver exceptional results, providing our customers with a competitive edge in their industries.
  • Our team of experienced professionals is dedicated to providing top-notch customer service, ensuring that every customer has a positive experience.
  • We work closely with our customers to understand their unique needs and provide customized solutions that meet those needs.
  • Our state-of-the-art production facility is equipped with the latest tools and equipment, allowing us to produce high-quality Driving Chains products efficiently and cost-effectively.
  • We offer a wide range of customization options for our Driving Chains products, allowing customers to create their own unique designs.

Hot Tags: